Forklift Specifications / Hyster / Hyster S120FT PRS

Hyster S120FT PRS Forklift Specifications

AttributeValue
MakeHyster
ModelS120FT PRS
Forklift TypeCushion Tire – Internal Combustion
Basic Capacity (lbs/kg)12000/5443
Load Center (in/mm)24/610
PowerLPG
EngineGM 4.3L
Tire TypeCushion Drive, Cushion Steer
Tilt – standard (forward/back)5/6 degrees
Length to Carriage Front (in/mm)106.5/2705
Width – standard tires (in/mm)52.0/1320
Width – wide tread tires (in/mm)55.9/1420
Height to Top of Overhead Guard Standard (in/mm)86/2175
Height to Top of Overhead Guard Optional (in/mm)83/2108
Turning radius (in/mm)93.5/2375
Right Angle Stack Aisle Width (in/mm)115.6/2937
Weight with 2-StageLFL Mast – no attachment (lbs/kg)18686/8476
Front Tire Size22x12x16
Rear Tire Size18x8x12.2
Wheelbase (in/mm)70.5/1790

Hyster S120FTPRS Reference Video

Hyster S120FTPRS Reference Images

Used Forklifts, Fair Prices

Comments (6)

Showing comments from the original product page.

Leave a Comment

Your email address will not be published. Required fields are marked *

    1. If the machine is counting down 30 seconds and then turning off you have an issue the ECU is trying to prevent from getting worse. Check for error codes – if you have any you can post them here and get more info. Otherwise look for main issues like overheating, low coolant, low oil, fuel leaks, etc. If you don’t have a code and can’t find the issue on your own it’s best to call the Hyster dealer.

  1. Code 522655-1 – Closed Loop Feedback (LPG) Short Term Fuel Trim High. This means you have an intermittent lean run.

    1. We replaced the LP fuel filter and the code persists. Also tried to clean out electronic pressure regulator and code is still there. Trying the regulator diaphragm next.

    1. Check 20 amp fuses in fuse box next to battery. If one is blown this will prevent the machine from starting.