Jungheinrich Forklift Error Codes
- 0915.2 - Industrial truck not ready for operation - battery door opened.
- 0938.1 - Battery discharged (0%).
- 1901.1 - Drive pedal activated during startup.
- 1904.1 - No travel direction present with drive pedal activated.
- 1908.1 - Seat belt or belt lock not closed when the pedal is pressed.
- 1909.1 - Activation of drive pedal when the parking brake is not released.
- 1917.1 - Drive pedal and brake pedal both activated at the same time.
- 1918.1 - Industrial truck ready for operation, but cab door opened.
- 2908.1 - Seat belt or belt lock not closed when hydraulic function is activated.
- 2937.3 - Simulatneous activiation of several hydraulic functions that can only be operated as individual functions.
- 2951.1 - Hydraulic function activated during startup.
- 5409.1 - Battery temperature too high
- 5393.1 - Battery cell faulty
ALBERT BOADU –
We bought one of your forklifts, CAT EX5000, Serial A4EC360646. Can you provide for us the Service manual for the machine?
Thank you.
Ram Khudan –
Mitsubishi forklift
Model EDR18N2
Serial 82827655
Need the shop/service manual
Andy Guild –
Thanks for the message. The best way to get the service manual for an EDR18N2 is contact your nearest Mitsbushi forklift dealer. You can search on this website: https://www.logisnextamericas.com/en/mit/find-your-dealer
Iftikhar ahmed –
Jungheinrich reach truck e 4809.01 model etr335d serial no 82826325
Dennis Lucckino –
Error code 1908.1 comes on when I get off of the unit
Andy Guild –
Description: “Travel and/or lift setpoint”
and “safety switch open”
combination invalid
Cause:
The event message is triggered
if for T >= 500 ms the following applies:
• Travel or hydraulic setpoint not equal to zero and safety
switch not applied
This event message can be triggered by incorrect
operation.
Action:
– Close safety switch;
– Check wire connections;
– Check safety switch and replace if necessary;
– Check signal-evaluating controller and replace if
necessary;
Z Safety switches can include:
– Deadman (foot switch),
– Seat switch,
– Tiller switch.
Hanys –
1190.1
Andy Guild –
ISM Sensor 1 voltage Implausible – Invalid voltage at optional sensor 1 (stage 4 only). The sensor voltage is out of range (0.5V – 9.5V). Check ISM sensor 1 parameter settings (parameter #11-17); Check wire connection to ISM sensor 1; Check ISM sensor 1 and replace if necessary; Replace signal evaluating controller.
Kevin –
Forklift stuck in Turtle mode
Andy Guild –
Hi Kevin – can you reply with the make and model of your forklift? We can start there and see if we can narrow down the troubleshooting.
Sangram chavan –
Forklift truck error cade E 4802.2
Andy Guild –
Sorry we can’t help more with this one. Limited info available for these codes but looks like electrical communication error.
Mehmet –
I’m curious if you solved the error code.
Raymond Delamar –
I have a Jungheinrich ETR230 could you tell me what error code E4809.01 is
Dinusha ruwan Athauda –
E4334
Andy Guild –
Not sure what this one is. I don’t see it listed in the Jungheinrich full code list.
Jose –
How to fix Jungheinrich E 1324.1
Jose –
Jungheinrich Error Code E 1324.1, E 0330.5, E1310.1
Andy Guild –
1324.1 – Brake pedal signal input implausible – check wire connection; brake pedal power supply; replace brake pedal; replace signal evaluating controller
0330.5 – not sure about this one
1310.1 – Accelerator pedal input signal implausible – check wire connection; check accelerator power supply; replace accelerator pedal; replace signal evaluating controller