Looking for Used Hyster Forklifts?
Machine Maxx USA is committed to customer service and quality used forklifts. We put integrity first so that you can be sure you're doing business with the right people - people just like you!
Make: Hyster
Model: S120FT PRS
Forklift Type: Cushion Tire - Internal Combustion
Basic Capacity (lbs/kg): 12000/5443
Load Center (in/mm): 24/610
Power: LPG
Engine: GM 4.3L
Tire Type: Cushion Drive, Cushion Steer
Tilt - standard (forward/back): 5/6 degrees
Length to Carriage Front (in/mm): 106.5/2705
Width - standard tires (in/mm): 52.0/1320
Width - wide tread tires (in/mm):55.9/1420
Height to Top of Overhead Guard Standard (in/mm): 86/2175
Height to Top of Overhead Guard Optional (in/mm): 83/2108
Turning radius (in/mm): 93.5/2375
Right Angle Stack Aisle Width (in/mm): 115.6/2937
Weight with 2-StageLFL Mast - no attachment (lbs/kg): 18686/8476
Front Tire Size: 22x12x16
Rear Tire Size: 18x8x12.2
Wheelbase (in/mm): 70.5/1790
Machine Maxx USA is committed to customer service and quality used forklifts. We put integrity first so that you can be sure you're doing business with the right people - people just like you!
Andy Guild –
code 2000-12 machine won’t start
Andy Guild –
Check 20 amp fuses in fuse box next to battery. If one is blown this will prevent the machine from starting.
Andy Guild –
Code 522655-1 – Closed Loop Feedback (LPG) Short Term Fuel Trim High. This means you have an intermittent lean run.
Andy Guild –
We replaced the LP fuel filter and the code persists. Also tried to clean out electronic pressure regulator and code is still there. Trying the regulator diaphragm next.
FERNANDO –
I HAVE A HYSTER THAT ENGINE SHUTOFF IN 30 SECONDS AFTER IT STARTS
Andy Guild –
If the machine is counting down 30 seconds and then turning off you have an issue the ECU is trying to prevent from getting worse. Check for error codes – if you have any you can post them here and get more info. Otherwise look for main issues like overheating, low coolant, low oil, fuel leaks, etc. If you don’t have a code and can’t find the issue on your own it’s best to call the Hyster dealer.