Hyster S50FT Forklift Specifications

Make: Hyster
Model: S50FT
Type: Cushion Tire Internal Combustion
Basic Capacity (lbs/kg): 5000/2268
Load Center (in/mm): 24/610
Power: LPG
Engine: PSI 2.4L/Kubota 2.5L
Tire Type: Cushion Drive, Cushion Steer
Tilt - standard (forward/back): 5/5 degrees
Length to Fork Face (in/mm): 90.2/2291
Width - standard tires (in/mm): 42.0/1067
Width - wide tread tires (in/mm): 48.9/1242
Height to Top of Overhead Guard Standard (in/mm): 84/2128
Turning radius (in/mm): 78.7/2000
Right Angle Stack (in/mm): 94.1/2390
Weight with 2-StageLFL Mast(lbs/kg): 8587/3895
Front Tire Size: 21x7x15
Rear Tire Size: 16x5x10.5
Wheelbase (in/mm): 56.3/1430

S50FT Video For Reference

Hyster S50FT Images For Reference

Looking For Used Hyster Forklifts?

Machine Maxx USA is committed to customer service and quality used forklifts. We put integrity first so that you can be sure you're doing business with the right people - people just like you!

3 thoughts on “Hyster S50FT Forklift Specifications”

  1. Andy Guild
    Reply

    Andy Guild

    Code 522737-10 is displayed. Oxygen sensor slow to respond.

  2. Andy Guild
    Reply

    Andy Guild

    Code 522592-0 – EPR Pressure Greater Than Commanded – A. WORN OR DAMAGED PRIMARY OR SECONDARY SEAT B. FAULTY ELECTRONIC PRESSURE REGULATOR (EPR) ELECTRICAL CONNECTIONS C. EPR FAILURE

    • Andy Guild
      Reply

      Andy Guild

      The EPR can often be cleaned. Take off the intake hose and spray a carb clean type of product in the EPR, reconnect the hose and run the machine. Might need to repeat a few times.

Leave a Reply

Your email address will not be published. Required fields are marked *