Looking For Used Mitsubishi Forklifts?
Machine Maxx USA is committed to customer service and quality used forklifts. We put integrity first so that you can be sure you're doing business with the right people - people just like you!
Mitsubishi EDR18N2 Forklift, Battery & Charger Specifications
Make: Mitsubishi
Model: EDR18N2
Forklift Type: Reach Truck Forklift
Basic Capacity (lb/kg): 3500/1580
Load Center (in/mm): 24/600
Power: Electric
Tilt (forward/back): 3/4 degrees
Overall Length (in/mm): 78.1/1983
Length to Fork Face (in/mm): 62.3/1582
Height to Top of Overhead Guard (in/mm): 95/2413
Minimum turning radius (in/mm): 70.74/1797
Weight without battery (lb/kg): 740/3350
Wheelbase (in/mm): 61.5/1562
Tire Size - Steer: 13.5x5.5"
Tire Size - Caster: 7.0x4.0"
Tire Size - load wheels: 5.0x3.62"
Mitsubishi EDR18N2 Battery and Charger Info
36 Volts
Box Dimensions: 16.25 x 38.42 x 31.65"
Max Amp Hours: 1120
Minimum Weight: 2000lbs
Andy Guild –
Use this section to ask questions and leave comments about the Mitsubishi EDR18N2 forklift.
Leng Moua –
Hey, I drive one of these for work but I keep getting code 1120.01 and apparently no one knows what this code means, including the tech who came out here for it. It doesn’t show up in the machines error log eirh
Andy Guild –
I think this is the error you’re getting:
Drive wheel slip excessive
Excessive slip / drive has probably been tipped
The AC-3 Power Control (U8) has detected excessive
deviation (slip) between the phase current frequency and
the speed.
The activation limit is 20 msec.
More torque is required from / placed on the motor than it
can provide / accept;
Field current is reduced excessively;
Error accompanying sensor bearing control or output
stage protection;
Operating system does not allow enough slip for the
driven motor;
AC-3 Power Control component is damaged
– Check motor connection wire (wire breakage);
– Check motor model, replace if necessary;
– Check motor and replace if necessary;